8-38. PRE-LOW OIL PRESSURE SENSOR REPLACEMENT (CONT).
Adhesives, solvents, and sealing compounds can burn easily, can give off harmful
vapors, and are harmful to skin and clothing. To avoid injury or death, keep away from
open fire and use in well-ventilated area. If adhesive, solvent, or sealing compound
gets on skin or clothing, wash immediately with soap and water.
Apply sealing compound to threads of pre-low oil pressure sensor (2).
Install pre-low oil pressure sensor (2) on oil filter head (3).
Install wire (1) as noted prior to removal of pre-low oil pressure sensor (2).
Connect batteries, (TM 9-4940-568-10).
Start generator and check for leaks, (TM 9-4940-568-10).
END OF TASK