8-37. OIL PRESSURE SENDING UNIT REPLACEMENT (CONT).
Adhesives, solvents, and sealing compounds can burn easily, can give off harmful
vapors, and are harmful to skin and clothing. To avoid injury or death, keep away from
open fire and use in well-ventilated area. If adhesive, solvent, or sealing compound
gets on skin or clothing, wash immediately with soap and water.
Apply sealing compound to threads of oil pressure sending unit (2).
Install oil pressure sending unit (2) in tee fitting (3).
Connect wire connector (1) to oil pressure sending unit (2).
Connect batteries, (TM 9-4940-568-10).
Start generator and check operation of oil pressure gage, (TM 9-4940-568-10).
Install rear panel, (TM 9-4940-568-10).
END OF TASK