8-35. PRE-HIGH COOLANT TEMPERATURE SENSOR REPLACEMENT (CONT).
Adhesives, solvents, and sealing compounds can burn easily, can give off harmful
vapors, and are harmful to skin and clothing. To avoid injury or death, keep away from
open fire and use in well-ventilated area. If adhesive, solvent or sealing compound gets
on skin or clothing, wash immediately with soap and water.
Apply sealing compound to pre-high coolant temperature sensor (2).
Install pre-high coolant temperature sensor (2) and wire (1) on engine (3).
Install wire (1) on pre-high coolant temperature sensor (2).
Fill cooling system, (Para 8-25).
Connect batteries, (TM 9-4940-568-10).
Start generator and check for leaks, (TM 9-4940-568-10).
END OF TASK