Adhesives, solvents, and sealing
compounds can burn easily, can
give off harmful vapors, and are
harmful to skin and clothing. To
avoid injury or death, keep away
from open fire and use in
well-ventilated area. If adhesive,
solvent, or sealing compound
gets on skin or clothing, wash
immediately with soap and water.
Coat threads of reducer (5) and hose elbow
(4) with sealing compound.
Install reducer (5) and hose elbow (4) onto
engine block (6).
Install hose (2) on hose elbow (4) and water
heater tube (3) and tighten two hose clamps
Fill radiator, (Para 8-25).
Connect batteries, (TM 9-4940-568-10).
Start engine and check for leaks, (TM 9-4940-568-10).
Install rear panel, (TM 9-4940-568-10).
END OF TASK