Install hose (17) on electric fuel pump (12) and tighten clamp (16).
Adhesives, solvents and sealing compounds can burn easily, can give off harmful
vapors, and are harmful to skin and clothing. To avoid injury or death, keep away from
open fire and use in wellventilated area. If adhesive, solvent or sealing compound gets
on skin or clothing, wash immediately with soap and water.
Apply sealing compound to threads of fitting (15).
Install fitting (15) in fuel tank (6).
Install tube (14) on fitting (15).
Install hose (11) on tube (14) and tighten clamp (13).
Install hose (11) on electric fuel pump (12) and tighten clamp (10).
Connect batteries, (TM 9-4940-568-10).
Prime fuel system, (TM 9-4940-568-10).
Start generator and check for leaks, (TM 9-4940-568-10).
END OF TASK