8-12. ENGINE AIR FILTER REPLACEMENT (CONT).
The seal area is on the inside of the open end of the filter. The sealing area will stretch
slightly and adjust itself over the outlet tube. To complete the seal, apply pressure at the
outer rim of the filter, not the flexible center. No cover pressure is required to hold the
seal. Failure to comply may result in damage to parts.
Install air filter (3) into air cleaner housing (4).
Install air cleaner cover (2) and secure with two retaining clips (1).
If installing a new air filter, perform Step (3) to reset service indicator.
Push on top of service indicator (5) to reset.
Start engine and check air seal on canister, (TM 9-4940-568-10).
Install front panel, (TM 9-4940-568-10).
END OF TASK