8-10. ENGINE AIR INTAKE MANIFOLD REPLACEMENT (CONT).
Adhesives, solvents and sealing compounds can burn easily, can give off harmful vapors, and are
harmful to the skin and clothing. To avoid injury or death, keep away from open fire and use in
wellventilated area. If adhesive, solvent or sealing compound gets on skin or clothing, wash
immediately with soap and water.
Apply sealing compound to threads of eight screws (5).
Install air intake manifold (4) and gasket (6) with eight screws (5). Tighten screws to 18 lb-ft (24 N.m).
Install air cleaner elbow (2) on air intake manifold (4) and air cleaner (3) and tighten two clamps (1).
Install fuel injector lines (high pressure), (Para 8-20).
Connect batteries, (TM 9-4940-568-10).
END OF TASK