(4) To pretension cable reel, perform the
(a) Wrap all boom light reel cable (2)
onto drum (18) of boom light reel
(b) Pull boom light reel cable (2) out one
full rotation of drum (18) and secure
(c) Wrap the boom light reel cable (2)
that was pulled out back onto the
drum (18). This sets the pretension
(d) Repeat steps b and c to place a total
of 12 pretension turns on boom light
reel assembly (17).
(e) Pull cable out completely to ensure
enough spring revolutions remain for
Install boom light reel cable and
cable ties as noted during
(5) Install guide (7) on boom (8) using two
washers (6) and nuts (5).
(6) Wrap boom light reel cable (2) in a
clockwise direction (five times) on the
boom fly mount (4) and secure with two
cable ties (3).
(7) Connect boom light reel cable (2) to
boom light cable (1).
Check for proper
boom light reel and
boom light operation
END OF TASK