TM 9-4940-568-10
2-161
2-37. OPERATING FORWARD REPAIR SYSTEM (FRS) IN MUD, SAND, OR SNOW.
NOTE
To determine unstable ground, observe a PLS tire track imprint left in the ground near
the FRS. If the tire track imprint depth is greater than 1/8, follow procedures in Para
2-39 Operating FRS on Unstable or Uneven Ground.
(1)
Unload FRS from PLS truck (TM 9-2320-364-10).
Do not direct high pressure water stream at inside shelter, seals, air intake, exhaust
outlet, generator or any other component of FRS that could be easily damaged by high
pressure water stream.
(2)
Scrape off any ice, snow, mud or sand that has accumulated, from the shelter.
(3)
For Cold Weather Starting procedures, refer to Para 2-40.
(4)
Wash shelter as soon as possible after operation in areas of mud and sand.