2-30. SHELTER HEATER OPERATION.
24 VOLT DC PANEL power switch must be in the ON position.
Install shelter canvas (1) on shelter
Start generator (Para 2-15).
To start shelter heater (2), depress the switch (3) to the left ( ) position and the red and green lights will
Adjust temperature setting by adjusting the temperature control dial (4).
To shutdown shelter heater (2), depress switch to the right ( ) position and the red and green lights will go out.
Prior to turning off MASTER DISCONNECT switch, allow shelter heater to perform
cool down cycle (approx. 3 minutes) until fan stops. Failure to comply may result in a
fire causing injury or death to personnel.
Allow the heater fan to stop before shutting down.