2-29. MATERIAL HANDLING CRANE (MHC) OPERATION (CONT).
Boom must be positioned in line with outrigger beam and fully retracted before
lowering. Observe boom during lowering to ensure no contact is made with rear of
shelter or crane outrigger jacks. Failure to comply may result in damage to
Operate HOIST lever and TELESCOPE lever at the same time.
Reel in cable until approximately 2 ft. (0.6m) of cable hangs from boom.
Move HOIST lever (26) to UP position to reel in cable (44) and TELESCOPE lever (45) to IN position to
retract boom (43).