TM 9-2330-389-14&P
4-21.
CROSS AXLE GROUP REPLACEMENT (Con't).
8.
Repeat steps 6 through 9 for opposite undercarriage group.
9.
Position multiple connector (23) in place on cross axle (7) and install flat washer (22) and capscrew (21).
10.
Position hose assembly (19) in cross axle bracket (20) and install new self-locking nut (18).
11.
Install clamp (16) on handbrake cable (17) and position clamp (16) on frame (12). Secure using two bolts (14),
two new lockwashers (15), and two nuts (13).
12
Position handbrake assembly (11) on frame (12) and secure with two bolts (9), two spacers (10), and two nuts (8).
13.
Install loop clamp (5) on parking brake cable (6). Position loop clamp (5) on cross axle (7) and install flat washer
(4) and capscrew (3).
14.
Repeat steps 11 and 12 for opposite hose assembly.
15.
Raise trailer (1) high enough to remove four jack stands using hydraulic jack. Remove jack stands and lower
trailer (1). Remove hydraulic jack.
4-16