Heater models will vary. Operation
of a typical heater, thermostat,
and air register is
shown. Refer to applicable
heater manual (see Appendix A) for further instructions.
(7) on rear wall of van body to desired temperature.
Turn switch (3) to HEAT so white light (4) illuminates
If red light (5) illuminates
and heater (2) stops, check for fuel or ignition failure. Press reset button (6) to
air flow, adjust four heater register levers (1), up to open and down to close.
To stop heater, turn switch (3) to OFF position.
Heater will shut down after purge.
air, turn switch (3) to FAN position.
exhaust covers. Failure to follow this caution may result in overheating