TM 9-2330-238-14
4-32. MARKER CLEARANCE LIGHT MAINTENANCE.
This Task Covers:
a.
Lamp Replacement
c. Cleaning and Inspection
b.
Removal
d.
Installation
Initial Setup:
Equipment Conditions:
Materials/Parts:
l Towing vehicle intervehicular cable disconnected
from semitrailer (para 2-11).
l Dry cleaning solvent (Item 14, Appendix E)
Tools/Test Equipment:
l General mechanics tool kit
a.
LAMP REPLACEMENT
1.
Remove two screws (l), retainer (2), and lens (3) from plate (7).
2.
Push in on lamp (5), turn counterclockwise, and remove from socket (6).
3.
Install lamp (5) in socket (6) and turn clockwise.
NOTE
The word BOTTOM is printed on the blackout marker clearance light lens. Ensure lens
is positioned properly when installed.
4.
Position lens (3) and retainer (2) in place on plate (7) and install two screws (l).
TA701957
4-51