TM 5-4930-244-14
b. Assembly.
(1)
Apply sealing compound to studs (2). Install studs (2) in crankcase (11) at bearing housing location at flywheel
end.
(2)
Apply sealing compound to oilway plug (10) Install plug (10) in crankcase (11).
NOTE
Valve (9) is preset Do not make any adjustments
(3)
Install valve (9) into crankcase (11).
(4)
Apply sealing compound to outer diameter of plug (7). Install plug (7) in crankcase (11).
(5)
Install two pins (1) in crankcase (11).
(6)
Install adapter (8) in crankcase (11).
(7)
Install studs (6) in crankcase (11).
(8)
Install long studs (5) in crankcase (11)
(9)
Install short studs (4) in crankcase (11).
(10)
Install studs (3) in crankcase (11).
(11)
Install oil pump (para. 6-8).
(12)
Install governor linkage (para. 6-6).
(13)
Install camshaft (para. 6-4).
(14)
Install fan, flywheel, and crankshaft (para. 6-3).
(15)
Perform engine running-in (para. 6-11).
6-43