TM 5-4930-244-14
NOTE
Do steps 18 and 19 only if cover (5) was removed.
(18)
Install new packing (11) on cover (5).
(19)
Apply sealing compound to two screws (9).
(20)
Install screws (9) and washers (10) on cover (1) Install new seal (12) to cover (1).
(21)
Apply sealing compound on seven screws (7) and long screw (6).
(22)
Install screw (6) on crankcase (3).
(23)
Install screws (7), new gasket (8), and cover (1) to crankcase (3).
(24)
Torque three screws (7, 6,) to 9 lb-ft (12 Nm).
(25)
Install fuel lift pump (para. 5-10 f.)
(26)
Install fuel injection pump (para. 5-10 d ).
(27)
Install oil pan and gasket (para. 5-10j )
(28)
Install cylinder head (para. 6-2).
6-29