TM 5-4930-244-14
d. Repair. (Sheet 3 of 4).
(1)
Repair piston (6).
(a)
Assemble rings (15, 16, 17) in proper grooves on piston (6).
NOTE
Rings (15, 16, 17) should not bind and should move freely in grooves
(b)
Check side clearance of piston rings (15, 16, 17). Side clearance should not exceed 0.010 Inch (0.254 mm)
If side clearance exceeds maximum allowable limits, replace piston (6).
(2)
Repair rod (1).
(a)
Install sleeve (7) in rod (1), making sure oil hole on sleeve (7) lines up with hole on rod (1).
(b)
Install new bearing set (18) in connecting rod end cap (3) and rod (1).
6-10