TM 5-4930-244-14
b. Installation.
NOTE
Before installation wrap threads on hex nipple (5), hex head-plug (7), male adapter
(8) and male elbow (9) with Teflon Tape.
(1)
Install male elbow (9), male adapter (8) and hex head-plug (7) into ports of quick release and limiting valve (2).
(2)
Align holes in quick release and limiting valve (2) with holes in trailer, and install two hex headcap screws (3) and
two locknuts (4).
(3)
Install hex nipple (3) and synchronizing valve (6) into port on quick release and limiting valve (2).
(4)
Connect two air brake lines (1) to quick release and limiting valve (2) fittings
4-161