TM 5-4930-244-14
c.
Installation.
CAUTION
·
Unit components can be damaged by over tightening. Do not over tighten
nipples attaching to alcohol injector.
(1)
Before installation, wrap nipples in opposite direction of threads with Teflon Tape
(2)
Install alcohol injector (9) onto nipple (20) and tighten.
(3)
Attach cap screw (12), washer (13), chain assy hook (14), and new self-locking nut (15) onto bracket (16)
(4)
Attach bracket (16) onto frame using two bolts (17), two washers (18), and two new self-locking nuts (19)
(5)
Close petcock drain (3) Fill container with methyl alcohol
(6)
Put fill plug (21) back on alcohol injector (9) and tighten
(7)
Close vent by turning lever (2)
(8)
Open ball valve by turning ball valve handle (1). Check for leaks
(9)
Adjust flow alcohol injector (9). (Refer to para 3-5).
4-25