Not Fully Mission Capable If Column. This col-
Procedure Column. This column contains a brief
umn provides information to assist the unit main-
description of the procedure by which the check
tenance personnel in deciding if the specified
or service is to be performed. Illustrations are pro-
check or service indicated if the plate compactor
vided to assist in the location and identification of
is ready for use.
Table 4-2. Unit Preventive Maintenance Checks and Services for Plate Compactor
Not Fully Mission
V-belt will not adjust. V-belt is missing,
Check tension and adjust if necessary
broken, cracked to the belt fiber; has
more than 1 crack (1/8 inch in depth
or 50 percent of belt thickness) or has
frays more than 2 inches long.
One or more fasteners will not tighten.
Check all threaded fasteners for
looseness. Tighten fasteners as
Specified clearance cannot be
Check valve clearance, adjust valves
Quarterly Fuel Filter
Oil below full level.
Check oil level. Fill to full level if
Section V. TROUBLESHOOTING PROCEDURES
4-11. TROUBLESHOOTING PROCEDURES.
The following procedures do not repeat the "Test or
Table 4-3, lists the common malfunctions which you
Inspection" or "Corrective Action" procedures pro-
may find during the operation or maintenance of the
vided in the operator troubleshooting section of Chap-
plate compactor. This manual cannot list all malfunc-
ter 3. Perform the test/inspections and corrective
tions that may occur, nor all tests or inspections and
actions in the order listed.
corrective actions. If a malfunction is not listed or is
not corrected by listed corrective actions, notify unit