HOSE GUARD FABRICATION.
Plastic hose guard for the hydraulic motor hoses is fabricated from bulk hose guard stock, P/N 1722-95. It is fabricated
by cutting 12 in. (305 mm) length of the bulk hose guard using tin snips. Wrap hose guard around hydraulic hoses.
Figure G-3. Hose Guard
WATER LINES FABRICATION.
The two water lines are fabricated from bulk hose stock, P/N B708. Locations and installation instructions are found in
paragraph 4-123. Cut bulk hose to desired length using a fine-toothed hacksaw or suitable cutting device. Table G-5
lists the hoses.
Table G-5. Water Hoses