2-8. OPERATING PROCEDURES (CONT).
Move sprinkler toggle switch (5) to on position.
Proceed with sweeping operation:
When driving the tow vehicle, keep in mind the overall length of both the sweeper and tow vehicle.
When turning allow adequate clearance for the sweeper to turn inside of the turning radius of the tow
When employing sweeping patterns requiring more than one pass, allow a minimum of six inches of
overlap with the last pass.
Avoid abrupt stops as the sweeper may swing to the left or right.
Whenever possible, an assistant will act as a ground guide to direct the driver when backing.
Maximum towing speed during sweeping operation is 8 mph (12 kph). Do not exceed this
speed or damage to equipment may result.
Do not run water pump when tank is empty. Damage to equipment may result.
Do not exceed a towing speed of 8 mph (12 kph) during sweeping operations.
Monitor water level in tank during operation.