Adhesives, solvents, and sealing
compounds can burn easily, can give
off harmful vapors, and are harmful
to skin and clothing. To avoid injury
or death, keep away from open fire
and use in a well ventilated area. If
compound gets on skin or clothing,
wash immediately with soap and
Coat threads of two screws (8) and three screws
(5) using thread locking compound.
Install two washers (9) and two screws (8) in starter (10) using a 9 mm open end wrench.
Install actuator (7) and spring (6).
Refer to matchmarks and install solenoid (4) and three screws (5) using a cross tip screwdriver.
Install copper washer (3), connector (2), and nut
(1) on solenoid (4) using a 13 mm open end
starter (para 4-58)
END OF TASK
5-36. BATTERY REPAIR.
Refer to TM 9-6140-200-14, Operator/Unit/Direct Support/General Support Maintenance Manual for care, maintenance,
repair, and inspection of lead-acid storage batteries.