REAR ENGINE HOUSING REPLACEMENT (CO NT).
Install panel (8) and two screws (7) using
a 10 mm open end wrench.
Install O-ring (6), cover (5), two screws
(4), and oil seal (3) using a 6 mm hex
Adhesives, solvents, and sealing
compounds can burn easily, give off
harmful vapors, and are harmful to
skin and clothing. To avoid injury or
death, keep away from open fire and
use in a well-ventilated area. If
compound gets on skin or clothing,
wash immediately with soap and
Coat gasket (10) with sealing compound.
Install gasket (10), rear engine housing
(2), and 13 screws (1). Tighten screws to
22 lb-ft (30 Nm) using a torque wrench
and 6 mm hex head socket.
Install gasket (9).
Follow-on maintenance: Install fly-
wheel (para 5-17).
END OF TASK