TM 5-3825-230-14&P
b.
Cleaning/Inspection.
WARNING
Dry cleaning solvent P-D-680 is toxic and flammable. Wear protective goggles, face mask, and
gloves and use only in a well ventilated area. Avoid contact with skin, eyes, and clothes and
don't breathe vapor. Do not use near open flame or excessive heat. The flashpoint for type I dry
cleaning solvent is 100°F (38°C) and for type II is 140°F (60°C). If you become dizzy while using
cleaning solvent, get fresh air immediately and get medical aid. If contact with eyes is made,
flush eyes with water and get medical aid immediately.
(1)
Clean all parts with dry cleaning solvent
P-D-680.
(2)
Inspect cylinder bore for wear, pits or
scratches.
(3)
Inspect pistons for scratches, cracks and
scoring.
(4)
Measure and record cylinder bore using a
micrometer. Acceptable tolerance is
3.3858 to 3.3866 in. (86 to 86.02 mm). If
out of tolerance, replace cylinder.
3.3858 TO 3.3866 in. (86 to 86.02 mm)
5-15