TM 5-3825-230-14&P
4-98. ENGINE ENCLOSURE REPLACEMENT (CONT).
g.
Hasp and Latch.
(1)
Removal. Drill out four rivets (1) using an electric drill and 1/8 in. drill bit and remove hasps (2), and latches
(3) from door panels (4), and main engine enclosure (5).
(2)
Installation. Install latch (3) on main engine enclosure (5), and hasps (2) on door panels (4). Secure latches
and hasps with rivets (1) using a rivet gun.
NOTE
Follow-on maintenance:
Instrument Panel:
.
Install Control panel wires (para 4-80)
.
Install throttle control cable and engine cut off cable (Para 4-47)
Rear Panel:
.
Install air cleaner (para 4-37)
.
Exhaust pipe removed (para 4-51)
Main Engine Enclosure:
.
Install control panel wires (pa ra 4-80)
.
Install throttle control cable and engine cut off cable (para 4-47)
.
Install air cleaner (para 4-37)
.
Install exhaust pipe (para 4-51)
END OF TASK
4-176