TM 5-3825-230-14&P
4-83. TERMINAL/CONNECTOR REPLACEMENT
This task covers:
a.
Removal
b.
Installation
INITIAL SETUP
Tools
Equipment Condition
Tool Kit, General Mechanic's: Automotive
TM or Para
Condition Description
Para 4-73
Battery cables
disconnected.
NOTE
Ensure the wiring harness (12V or 24V) to tow vehicle is disconnected.
a. Removal
(1)
Remove components as necessary to gain access to damaged terminal.
NOTE
·
Record wire to terminal relationship for ease of assembly.
·
Refer to Appendix H for electrical schematic.
(2)
Cut off damaged terminal or connector.
(3)
Strip wire as appropriate for replacement terminal or connector.
b.
Installation.
(1)
Connect wire(s) to terminal or connector and crimp or tighten as necessary.
(2)
Reconnect terminal or connector to unit.
(3)
Install any components removed.
NOTE
Follow-on maintenance: Connect battery cables (para 4-73)
END OF TASK
4-138