This task covers:
Tool Kit, General Mechanic's: Automotive
TM or Para
Left shroud removed.
Tags, identification, item 35 Appendix E
General Safety Instructions
Engine completely cooled.
Make sure engine has completely cooled before starting this procedure. Injury to personnel may
Tag all wires before removal to aid in installation.
Remove nut (1), lockwasher (2), and tag and remove three wires (3) using a 13 mm open end wrench.
Remove screw (4), starwasher (5), and tag and remove wire (6) using a flat tip screwdriver.
Remove two screws (7), lockwashers (8), and starter (9) using a 8 mm hex head wrench.