TM 5-3825-230-14&P
(4)
If damaged, remove four studs (7) using pliers.
(5)
Remove rain cap (8) from pipe (2) by loosening nut (9) using a 7/16 in. open end wrench.
b.
Installation.
(1)
If removed, install four studs (7) using pliers.
(2)
Position gasket (6) on studs (7) and install muffler (3) and four nuts (4). Tighten nuts to 22 Ib-ft (30 Nm) using a
torque wrench and 12 mm socket.
(3)
Position clamp (1) on pipe (2).
(4)
Install pipe (2) on muffler (3). Tighten clamp (1) using a 1/2 in. open end wrench.
(5)
Install rain cap (8) on pipe (2) and tighten nut (9) using a 7/16 in. open end wrench.
NOTE
Follow-on maintenance:
Install top access panel (para 4-98)
Close right side access cover (para 3-5)
END OF TASK
4-75