Adhesives, solvents and sealing compounds can burn easily, can give off harmful vapors and are
harmful to skin and clothing. To avoid injury or death, keep away from open fire and use in a
well-ventilated area. If adhesive, solvent, or sealing compound gets on skin or clothing, wash
immediately with soap and water.
Apply thread locking compound to threads of valve (1).
Install valve (1) in tank (4) using a 11 mm open end wrench.
Position clamp (2) on hose (3).
Install hose (3) on valve (1) and tighten clamp (2) using a flat tip screwdriver.
Fill fuel tank (para 3-8).
Check for leaks.
END OF TASK