TM 5-3825-230-14&P
4-32. INTAKE MANIFOLD REPLACEMENT.
This task covers:
a. Removal
b. Installation
INITIAL SETUP
Tools
Equipment Condition
Shop Equipment, Automotive Maintenance and
TM or Para
Condition Description
Repair; Organizational Maintenance, Common
Para 4-50
Glow plugs removed.
No. 1, Less Power
Para 4-51
Muffler removed.
Para 4-38
Vapor separator
fitting removed
Materials/Parts
.
Gasket
Lockwashers
General Safety Instructions
Muffler and manifold cooled completely.
a. Removal
WARNING
Make sure that manifold has cooled before starting work or injury to personnel may result.
(1)
Loosen clamp (1) using a flat tip screwdriver. Disconnect hose (2) from manifold (3).
(2)
Remove four nuts (4), four lockwashers (5), manifold (3), and two gaskets (6) from studs (7) using a ratchet,
extension and 13 mm socket.
(3)
Loosen clamp (8) and remove rubber cap (9) using a flat tip screwdriver.
4-37