Engine Oil Pressure Gage 30-60 PSI
Ignition Switch (pull-on, push-off) (east shut-down)
h. Battery. One (1) 12 volt battery 55 AMP, is installed to provide 12 volts for the starting system. The battery is
located on the left side of the Auger assembly, Just below the fuel tank.
(1) Engine - MIL-L2104 lubricating oil is recommended for use in this engine when the ambient temperature is above
minus 10 degrees Fahrenheit. MIL-2104 oils are available under the following NSN:
(2) Hydraulic System - (260 Qt), MIL-L-2104 O/E/DO 10. See above listing for NSN and quantity.
(3) Transmission - (13 Qt), OE SAE 10 MIL-L-2104. See above listing for NSN and quantity.
(4) Lubrication Oil Gear
Right Angle (3 Qt) G090
Final Drive (3-1/2 Qt) G90
Quantity - 5 Gal
Winch (1 Qt) G90
Grade - 90
Operational and maintenance procedures are covered in the Manufacturer's Manual overpacked with the equipment (see
appendix). The category of maintenance for the loader will be in accordance with the Maintenance Allocation Chart (MAC)
(see appendix) of this SOMARPI. Refer to paragraph of this SCKARPI for requisitioning of repair parts and support