OPERATOR/CREW PREVENTIVE MAINTENANCE CHECKS AND SERVICES
B - BEFORE
D - DURING
A - AFTER
W - WEEKLY
M - MONTHLY
AUGER, EARTH, SKID MOUNTED MODEL 270-9
ITEM TO BE INSPECTED
EQUIPMENT IS NOT
PROCEDURE:CHECK FOR AND HAVE REPAIRED,
FILLED, OR ADJUSTED AS NEEDED
PERFORM WEEKLY AS WELL AS BEFORE PMCS IF:
a. You are the assigned operator but have not operated the unit since the
b. You are operating the equipment for the first time.
Look for evidence of fluid leakage (oil, fuel, coolant).
Class III leaks are found or
any fuel leakage.
Check dipstick for proper level.Add oil as necessary to full mark.
Radiator cooling system is pressurized. Remove cap slowly and
only when engine is cool or painful burns could result.
Check coolant level. Add coolant as required. (Level should be approxi-
one inch from bottom of filler neck).
CONTROLS AND INSTRUMENTS (CHECK FOR PROPER INDICATION AND
a. Engine coolant temperature gauge 160°-1850F (71°-850C).
b. Engine oil pressure gauge 18 psig at 1200 rpm (idle speed).
d. Tachometer/hours meter 550 rpm - idle, 2500 rpm - max
Change 1 43