FIGURE 4-4. LUBRICATION KEY
1. For operation of equipment in protracted cold temperatures below -10°F, remove lubricants prescribed in the key
for temperatures above -10°F. Re-lubricate with lubricants specified in the key for temperatures below -10°F.
2. Oil Filter. After installing new filter, fill crankcase, operate engine 5 minutes, check for leaks, check crankcase oil
level and bring to full mark.
3. Lubricants. The following is a list of lubricants with the Military symbols and applicable specification numbers:
OE/HDO - MIL-L-2104
GAA - MIL-G-10924
GO - MIL-L-2105
OEA - MIL-L-46167
Copy of this Lubrication Diagram will remain with the equipment at all times; instructions herein are mandatory.