Long distance movement
Refer to Page 10 and remove the auger from auger shaft.
REMOVING AUGER FROM CARRIER, SEE PAGE 10.
Drain the auger engine fuel tank.
Refer to Page 8 and remove the front, center, and rear mounting hardware securing the auger
assembly to the truck frame.
Use a suitable lifting device with at least 15,000 pounds capacity and lift auger assembly from the
Refer to TM 38-230-2 and prepare the auger assembly for shipment to the new work-site.
Reinstallation after movement
Remove all packaging and preservation tape from the auger assembly.
Reinstall the auger assembly on the carrier frame per Page 8.