OPERATOR/CREW PREVENTIVE MAINTENANCE CHECKS AND SERVICES
B - BEFORE
D - DURING
A - AFTER
W - WEEKLY
M - MONTHLY
ITEM TO BE INSPECTED
EQUIPMENT IS NOT
PROCEDURE:CHECK FOR AND HAVE REPAIRED,
FILLED, OR ADJUSTED AS NEEDED
Perform weekly as well as before PMCS if:
You are the assigned operator, but have not operated the equipment
in the last week.
You are operating the equipment for the first time.
To avoid injury/death to personnel, or damage to equipment, do not
run the equipment engine when performing before operations PMCS.
Your safety, and the safety of those around you, depends upon YOU
using care and good judgment in operation of equipment. Know the
positions and functions of ALL CONTROLS before operating this
equipment. Do not operate the equipment in an enclosed area unless
exhaust gases are piped outside. Exhaust fumes can cause serious
illness or death. Read and observe all warnings and cautions in the
front of the operators manual before performing your PMCS.
Perform all daily and/or weekly lubrication of the equipment prior to
operation. Check for loose/missing nuts, bolts/pins and cotter keys.
Walk around the equipment. Check for obvious damage and rust.
STA FORM 666