4. Remove four bolts (Figure 8, Item 2), washers (Figure 8, Item 3), two flange halves (Figure 8, Item 4), and
hydraulic hose (Figure 8, Item 1) from hydraulic line (Figure 8, Item 5).
5. Remove O-ring (Figure 8, Item 6) from hydraulic hose (Figure 8, Item 1). Discard O-ring.
6. Remove hydraulic hose (Figure 8, Item 1) from machine.
Figure 8. Crossover Hose, Rear Connection.
END OF TASK
Hydraulic oil is very slippery. Immediately wipe up any spills. Failure to follow this warning
may result in injury or death to personnel.
To prevent injury to personnel, wear protective eye covering and gloves.
Failure to follow these warnings may result in injury or death to personnel.
Tag and mark hose to aid in installation.
Note routing of hoses and lines to aid in installation.
Use a container to catch any fluid that may drain from hoses or system. Dispose of fluid
IAW local policy and ordinances. Ensure all spills are cleaned up.