19. Position ejector cylinder (Figure 26, Item 2) on cylinder mount (Figure 26, Item 1).
Use caution when using adhesives and sealants. Prolonged inhalation of vapors can
cause lung irritation. Contact with skin can cause dermatitis. Wear gloves and safety
goggles and use product in a well-ventilated area away from open flame. If ingested, keep
individual calm and seek medical attention. DO NOT induce vomiting. If contact with skin
or eyes is made, flush thoroughly with water. Dispose of cleanup rags IAW local policy and
ordinances. Failure to follow this warning may result in injury to personnel.
20. Apply antiseize compound to rear pivot (Figure 26, Item 3) and install rear pivot on cylinder mount
(Figure 26, Item 1) and ejector cylinder (Figure 26, Item 2).
Figure 26. Rear Pivot.