TM 5-3805-296-23-5
0361
REMOVAL
000361
WARNING
Wheels must remain chocked during entire procedure. Failure to follow this warning may
result in injury or death to personnel.
NOTE
Tag and mark wiring harness connector to aid in installation.
1. Disconnect main cab wiring harness connector (Figure 1, Item 5) from stop lamp switch connector
(Figure 1, Item 4).
CAUTION
Plug and cap all air tubes and fittings to prevent contamination. Failure to follow this
caution may result in equipment damage.
2. Remove stop lamp switch (Figure 1, Item 1) from fitting (Figure 1, Item 2) on brake air control valve
(Figure 1, Item 3).
Figure 1. Stop Lamp Switch.
0361
END OF TASK
CLEANING AND INSPECTION
000361
Clean and inspect all components IAW Electrical General Maintenance Instructions (WP 0540).
END OF TASK