TM 5-3805-296-23-5
0356
ASSEMBLY CONTINUED
WARNING
Use caution when using adhesives and sealants. Prolonged inhalation of vapors can
cause lung irritation. Contact with skin can cause dermatitis. Wear gloves and safety
goggles and use product in a well-ventilated area away from open flame. If ingested, keep
individual calm and seek medical attention. DO NOT induce vomiting. If contact with skin
or eyes is made, flush thoroughly with water. Dispose of cleanup rags IAW local policy and
ordinances. Failure to follow this warning may result in injury to personnel.
NOTE
Install T-fittings in correct port location and orientation on brake air supply solenoid as
noted during removal.
4. Apply sealant to T-fitting (Figure 13, Item 9) and install T-fitting on brake air supply solenoid
(Figure 13, Item 3).
5. Apply sealant to plug (Figure 13, Item 2) and install plug on T-fitting (Figure 13, Item 9).
6. Apply sealant to fitting (Figure 13, Item 1) and install fitting on T-fitting (Figure 13, Item 9).
7. Apply sealant to breather (Figure 13, Item 4) and install breather on brake air supply solenoid
(Figure 13, Item 3).
8. Apply sealant to T-fitting (Figure 13, Item 6) and install T-fitting on fitting (Figure 13, Item 8).
9. Apply sealant to fitting (Figure 13, Item 7) and install fitting on T-fitting (Figure 13, Item 6).
10. Apply sealant to fitting (Figure 13, Item 5) and install fitting on T-fitting (Figure 13, Item 6).
Figure 13. Brake Air Supply Solenoid.
0356