TM 5-3805-296-23-5
0301
INSTALLATION CONTINUED
NOTE
Remove plugs or caps from hydraulic hose and fitting.
Install hydraulic hose as tagged and marked during removal.
Install P-clamps as noted during removal.
8. Install new O-ring (Figure 16, Item 8) and hydraulic hose (Figure 16, Item 10) on elbow fitting (Figure 16,
Item 7). Do not tighten tube nut (Figure 16, Item 9) at this time.
9. Install P-clamp (Figure 16, Item 2) on two hydraulic hoses (Figure 16, Item 1 and 10).
10. Install P-clamp (Figure 16, Item 5) on hydraulic hose (Figure 16, Item 6).
11. Loosely install two P-clamps (Figure 16, Item 2 and 5), washers (Figure 16, Item 4), and bolts (Figure 16,
Item 3) on machine.
Figure 16. Hydraulic Hose, P-clamps, and Fitting.
0301