Lubricating/hydraulic oils can be very slippery. Immediately wipe up any spills. Failure to
follow this warning may result in injury or death to personnel.
Plug or cap hydraulic hose and fitting to prevent contamination. Failure to follow this
caution may result in equipment damage.
Tag and mark hydraulic hose and fitting to aid in installation.
Use a container to catch any fluid that may drain from system. Dispose of fluid IAW local
policy and ordinances. Ensure all spills are cleaned up.
31. Loosen tube nut (Figure 13, Item 3), and remove hydraulic hose (Figure 13, Item 4) and O-ring
(Figure 13, Item 2) from elbow fitting (Figure 13, Item 1). Discard O-ring.
Note routing of hydraulic hose to aid in installation.
32. Remove hydraulic hose (Figure 13, Item 4) from machine.
Figure 13. Hydraulic Hose and Fitting.
END OF TASK