CONTROL VALVE PILOT HOSES REMOVAL CONTINUED
Plug and cap all hydraulic hoses lines, and fittings to prevent contamination.Failure to
follow this caution may result in damage to equipment.
Tag and mark hydraulic hoses to aid in installation.
Note routing and location of hydraulic hoses to aid in installation.
Note location of tiedown straps to aid in installation.
Note location of P-clamp to aid in installation.
53. Loosen four tube nuts (Figure 17, Items 2, 3, 5, and 7) and remove four hoses (Figure 17, Items 1, 4, 6, and 8)
54. Remove four O-rings (Figure 17, Items 9, 10, 11, and 12) from machine. Discard O-rings.
Figure 17. Rear Main Control Valve.
END OF TASK