Use extreme caution when handling heavy parts. Provide adequate support and use
assistance during procedure. Ensure any lifting device used is in good condition and of
suitable load capacity. Keep clear of heavy parts supported only by lifting device. Failure
to follow this warning may result in injury or death to personnel.
Transmission output shaft splines must align with differential input splines for proper
installation. Failure to follow this caution may result in damage to equipment.
19. With assistance, using lifting device install transmission on machine.
20. Install 18 washers (Figure 39, Item 2) and nuts (Figure 39, Item 3) on machine.
21. Install four washers (Figure 39, Item 5) and bolts (Figure 39, Item 4) on machine.
Figure 39. Transmission Flange.