TM 5-3805-296-23-4
0250
ALTERNATOR BRACKET INSTALLATION
000250
WARNING
Use extreme caution when handling heavy parts. Provide adequate support and use
assistance during procedure. Ensure any lifting device used is in good condition and of
suitable load capacity. Keep clear of heavy parts supported only by lifting device. Failure
to follow this warning may result in injury or death to personnel.
NOTE
Alternator bracket weighs approximately 60 lb (27 kg).
1. If removed, install two new spacers (Figure 7, Item 3), two idler pulleys (Figure 7, Item 4), washers
(Figure 7, Item 5), and bolt (Figure 7, Item 6) on alternator bracket (Figure 7, Item 2).
2. Using assistance and lifting device, position alternator bracket (Figure 7, Item 2) on front housing
(Figure 7, Item 1).
3. Install two washers (Figure 7, Item 8) and bolts (Figure 7, Item 7) on alternator bracket (Figure 7, Item 2).
Figure 7. Alternator Bracket.
0250