TM 5-3805-296-23-2
0094
Table 1. 0177 Transmission Oil Temperature Sensor Diagnostic Code - Continued.
0094
CID FMI
TEST OR INSPECTION
CORRECTIVE ACTION
0177-08 Transmission Oil
11. Disconnect connector P-C18
Temperature Sensor
(WP 0012, Figure 269) from tractor
operator monitor.
Width, or Period
12. Inspect connector P-C18
Connector P-C18 Damaged
Continued
(WP 0012, Figure 269) and tractor
Replace dash wiring harness
operator monitor connector for
(WP 0510).
damage IAW Electrical General
Proceed to Test Step 16.
Maintenance Procedures
Tractor Operator Monitor Connector
(WP 0540).
Damaged Replace tractor operator
monitor (WP 0506).
Proceed to Test Step 16.
No Problem Found Proceed to Test
Step 5.
Test Step 5. Verify if Code is Still
Active.
1. Connect connector P-C18
(WP 0012, Figure 269) to tractor
operator monitor.
2. Connect connector P-C1
(WP 0012, Figure 253) to
connector W-C7
(WP 0012, Figure 252).
3. Connect connector W-C16
(WP 0012, Figure 87) to connector
CL-C3 (WP 0012, Figure 86).
4. Connect connector CL-C13
(WP 0012, Figure 59) to converter
oil temperature sensor connector
(WP 0012, Figure 58).
5. Start and run engine to normal
177-8 Transmission Oil Temperature
operating temperature
(TM 5-3805-296-10) while
Width, or Period Becomes Inactive
monitoring MSD for active
Troubleshooting complete. Proceed to
diagnostic code 177-8
step 6.
Transmission Oil Temperature
177-8 Transmission Oil Temperature
Sensor Abnormal Frequency,
Pulse Width, or Period (WP 0008).
Width, or Period Remains Active
Replace converter oil temperature
sensor (WP 0289).
Proceed to Test Step 6.
0094-7