TM 5-3805-296-23-2
0081
Table 1. 1293 Cushion Hitch Push Switch Diagnostic Codes Continued.
081
CID FMI
TEST OR INSPECTION
CORRECTIVE ACTION
Test Step 1. Inspect Implement
1293-04 Cushion Hitch
Control Joystick Assembly.
Switch Voltage Below
1. Turn ignition switch and battery
Normal Continued
disconnect switch to OFF position
(TM 5-3805-296-10).
2. Inspect implement control joystick
Joystick Assembly OK Proceed to
assembly for damage (WP 0503).
step 3.
Joystick Assembly Damaged
Replace implement control joystick
(WP 0503).
Proceed to Test Step 8.
3. Press and release cushion hitch
Button Operates Properly Proceed
to Test Step 2.
button several times
Button Fails to Operate Properly
(TM 5-3805-296-10).
Replace implement control joystick
(WP 0503).
Proceed to Test Step 8.
Test Step 2. Test Voltage to Cushion
Hitch Switch.
1. Disconnect connector CG-C14
(WP 0012, Figure 302) from
implement control joystick
connector (WP 0012, Figure 300).
2. Turn battery disconnect switch and
ignition switch to ON position
(TM 5-3805-296-10).
Voltage 12 0.5 V Proceed to step 4.
(WP 0540), test for voltage
Voltage Less Than 11.5 V Proceed
between connector CG-C14
to Test Step 3.
terminal 8 and terminal 5
(WP 0012, Figure 302).
Voltage 12 0.5 V Proceed to Test
(WP 0540), test for voltage
Step 5.
between connector CG-C14
Voltage Less Than 11.5 V Proceed
terminal 9 and terminal 5
to Test Step 6.
(WP 0012, Figure 302).
Test Step 3. Test for Shorted Fuse
Panel Wiring Harness.
1. Turn ignition switch and battery
disconnect switch to OFF position
(TM 5-3805-296-10).
2. Disconnect connector CG-C1
(WP 0012, Figure 283)
from connector W-C8
(WP 0012, Figure 282).
0081-10