TM 5-3805-296-23-1
0062
Table 1. 0600 Hydraulic Oil Temperature Sensor Diagnostic Codes Continued.
062
CID FMI
TEST OR INSPECTION
CORRECTIVE ACTION
Test Step 12. Test Chassis Wiring
0600-03 Hydraulic Oil
Harness for High Resistance or
Temperature Sensor Voltage
Open.
Above Normal Continued
1. Remove jumper wire from
terminal 5 and terminal 7 of
connector A-C6
2. Connect jumper wire between
terminal 1 and terminal 3
of connector J-C3
3. Disconnect connector J-C8
from connector W-C1
Resistance 5.0 Ohms or Less
(WP 0540), measure resistance
Proceed to Test Step 13.
between connector J-C8
terminal 11 and terminal 16
Replace chassis wiring harness
(WP 0305).
Proceed to Test Step 14.
Test Step 13. Test Main Cab Wiring
Harness for High Resistance or
Open.
1. Remove jumper wire from
terminal 1 and terminal 3
of connector J-C3
2. Connect jumper wire between
terminal 11 and terminal 16
of connector W-C1
3. Disconnect connector W-C12
transmission/chassis ECM.
Resistance 5.0 Ohms or Less
(WP 0540), measure resistance
Replace transmission/chassis ECM
between connector W-C12
(WP 0495).
terminal 11 and terminal 12
Proceed to Test Step 14.
Replace main cab wiring harness
(WP 0505).
Proceed to Test Step 14.
0062-8