2-17. COMPARTMENT CONTROL MODULE.
This task covers replacement of incandescent lamps (p. 2-116).
General Mechanics Tool Kit
Dry cleaning solvent (item 3, app D)
1. Using two screwdrivers, gently pry lens (1)
from lettered panel (2).
Observe the location of lamps in the lens.
Lamps must be reinstalled in the same
2. Pull lamps (3) from lens (1).
Unscrew lens (4), and remove lamp (5).
1. Insert lamps (3) into lens (1). Use the same
lamp sockets that lamps were removed from.
2. Insert lens (1) into lettered panel (2), as shown
in detail A. Press lens into lettered panel until
it snaps into place.
Insert lamp (5) into lens (4), and screw lens (4) into
lettered panel (2).