TM
3-4240-309-20&P
2-14. PROTECTIVE ENTRANCE (CONT).
ACTION
ITEM
LOCATION
1. Fabricate replacement nylon cable (2)
(item 1, app C, bulk materials). Cut new cable
to same length as old cable.
2. Crimp wire rope ferrules (7) on nylon cable (2).
1.
Install replacement quick release pin (6).
Quick release pin
Protective
Entrance
NOTE
When setting drive rivets, do not recess drive
pin. It should be driven flush with drive rivet
head.
2.
Secure nylon cable (2) to diagonal brace (5)
with washer (8) and screw (4), or use a
hammer to set drive rivet (1) with washer (8)
securing nylon cable (2) to vertical support (3).
2-88